Master Forge CBS24032L - ASSEMBLY INSTRUCTIONS; Attaching Lid and Top Components

Step 1: Attach Temperature Gauge
Remove pre-assembled wing nut and washer from
temperature gauge (B). Attach temperature gauge
(B) to lid (D) using the pre-assembled washer and
wing nut.
Step 2: Attach Lid Handle
Attach lid handle (A) to lid (D) using two M5x12
screws (BB) and two Ø6.5xØ18 washers (FF).
Hardware Used
B
D
D
1
2
A
ASSEMBLY INSTRUCTIONS
Ø6.5xØ18
Washer
FF
x 2
M5x12
Screw
BB
x 2
First
Second
6