Master Forge GGP-2501 - Interior Components and Gas Cylinder

ASSEMBLY INSTRUCTIONS
Step
21:
1) Open the hood assembly
(L)
and
put
four heat
shields
(T)
into the
grill
housing.
2) Place three cooking
grates (U)
in the
grill
housing
3)
lnstall the warming rack
(V)
on the top of
grill
housing.
o\
+
q-q
+
+
Step 22:
1) Place
a
gas
cylinder
(not
included) into the cabinet assembly.
2) Put the hose through the
hose
bracket and connect
the
cylinder
with the
gas
hose / regulator
as
shown.
3) Rotate the steel wire to secure
the
gas
cylinder as shown.
)
.9
ft
o
!t-
17