Skip to content
Manuals+
User Manuals Simplified.
Home » MasterLock » Master Lock Instruction Manual
Master Lock Instruction Manual
Transportation Security Administration (TSA) baggage screeners are trained to recognize the Travel
Sentry® red diamond logo on TSA – accepted locks. They have access to a secured set of codes and
tools which allow them to open, inspect and relock baggage that is locked with a TSA – accepted lock.
COMBINATION RESETTING INSTRUCTIONS
Your new lock is preset at the factory to unlock at 0-0-0. Make sure you are able to open and close the
lock prior to setting your own combination. Carefully follow each step to ensure proper setting
procedures.
1. Adjust dials so the preset factory combination of 0-0-0 aligns with the markers.
2. Hold cable tip (A) and move toward left to remove from the lock.
3. While pushing in button (B) turn the dials to any combination you choose.
4. Release button (B), insert cable tip (A) back into the hole, push down and move all the way to the
right.
5. The lock is now ready to be used with your combination. To change the combination again, repeat
steps 2-4.
© 2007 Master Lock Company LLC Milwaukee, Wisconsin U.S.A. www.masterlock.com I Made to
exclusive Master Lock specifications in Taiwan R.O.C.
Master Lock Instruction Manual – Download [optimized]
Master Lock Instruction Manual – Download
Related Manuals:
1. Pollen Master 844.889.5552 Machine Instruction Manual Instructions Before using the
To Next Page
Need help?
General
