16
SPOT SPRAYING
• Spot Spraying: To spot spray, pull the gun trigger. Make sure nozzle of
gun is pointed towards vegetation in need of spraying.
• Adjustable Nozzle: Twist the spray nozzle to adjust from a straight
stream to wide pattern mist.
Note: It is not unusual for the operator to be exposed to chemical drips
while adjusting the nozzle – use chemical resistant gloves when twisting.
BROADCAST SPRAYING
• Broadcast Valve Switch: Open broadcast valve switch to allow flow
from tank to boom nozzle.
• Ensure Correct Pattern: Make sure boom nozzle is pointed straight
down. If not, loosen the nozzle retaining nut and adjust orientation of the
boom nozzle opening to point straight down.
Note: It is not unusual for the operator to be exposed to chemical drips
while adjusting the broadcast nozzle. Chemical resistant gloves should be
worn.
• Turn On Power: Flip on power switch that is located on the sprayer
handle.
• Broadcast Valve Switch: Close broadcast valve switch to prevent
accidental spray release.
• Turn On Power: Flip on power switch that is located on the sprayer
handle.
USING SPRAYER (CONTINUED)
To Next Page
Loading...
