What causes pitting of metal fixtures in Master Spas Hot Tub?
Pitting of metal fixtures in your Master Spas hot tub is generally caused by low pH or total alkalinity. Check the water chemistry and adjust accordingly.
Key safety precautions to be observed when installing and using electrical equipment.
Explains hyperthermia, its symptoms, and effects, with warnings about water temperature and health.
Details suction entrapment hazards like hair, limb, body, and mechanical entrapment.
Recommendations and procedures to minimize the risk of suction entrapment hazards in the spa.
Troubleshooting steps for when the spa heater is not functioning correctly.
Explains reasons for GFCI tripping and how to address potential electrical problems.
Explanation of Residual Current Devices (RCDs) and their specifications related to spa electrical systems.
Wiring diagrams and options for the BP6013G1 model, including single and dual service.
Wiring diagrams and options for the MS6013XE model, including single and dual service.
Description of the main display screen of the Icon Spa Touch control panel.
Instructions for adjusting the spa's water temperature using the control panel interface.
Accessing and configuring spa settings, including heat modes and dual temperature ranges.
Understanding Ready, Rest, and Ready-in-Rest modes for spa heating and circulation.
Instructions on how to perform a GFCI test to verify proper function of the safety device.
Step-by-step process for pairing a Bluetooth device with the spa's audio system.
General| Brand | Master Spas |
|---|---|
| Model | HURRICANE |
| Category | Hot Tub |
| Language | English |
To Next Page