EasyManua.ls Logo

Master Spas MP Force - Page 79

Master Spas MP Force
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
77DO NOT DIVE.
SWIM SPA CONTROLS - ICON SPA TOUCH
REMINDER MESSAGES
130DO NOT DIVE.
CLEAN THE COVER
May appear on a regular schedule, i.e. every 30 days. Vinyl covers should be cleaned and
conditioned for maximum life.
TREAT THE WOOD
May appear on a regular schedule, i.e. every 180 days. Wood skirting and furniture should be
cleaned and conditioned per the manufacturers instructions for maximum life.
CHANGE THE FILTER
May appear on a regular schedule, i.e. every 365 days. Filters should be replaced periodically to
maintain proper swim spa function and sanitary conditions. EcoPur® elements should be replaced
every 180 days. Refer to Cleaning Your Filter Elements section in Routine Maintenance.
CHANGE THE UV
May appear on a regular schedule, i.e. every 18 months. Change the UV as instructed in the
Mast3rPur section. This is a general message and may not apply if swim spa is not equipped with
UV.
CHECK OZONE
May appear on a regular schedule, i.e. every 365 days. Check the ozone system as instructed in the
Regular Maintenance Procedures.
Additional messages may appear on specific systems.
Error
Message Code: 30
The heater is too hot
Clear
Reminder messages are simply cleared and automatically reset to appear at the next
preprogrammed interval by clicking the Clear Icon.

Related product manuals