How to get rid of chlorine odor in Master Spas Hot Tub?
A chlorine odor in your Master Spas hot tub can be due to excessive chlorine or low pH. To resolve this, shock the water with an oxidizer/non-chlorine shock treatment. If the odor persists, adjust the pH level of the water.
What to do if Master Spas SEATTLE water is cloudy?
Cloudy water in your Master Spas hot tub can be caused by dirty filters, unbalanced water chemistry, or old water. You should clean the filters with a filter cleaner and adjust filtration. Also, test and adjust the water chemistry levels. If the problem continues, drain the tub, clean the inner shell, and refill it with filtered water.
Why does my Master Spas SEATTLE Hot Tub water smell?
A water odor in your Master Spas hot tub is often due to low sanitizer levels, a pH imbalance, or bacteria/algae growth. Adjust the sanitizer level using chlorinating granules. If needed, adjust the pH. If the odor persists after adjusting the sanitizer, perform a system flush.
What causes eye or skin irritation in Master Spas Hot Tub?
Eye or skin irritation in your Master Spas hot tub may result from unsanitary water, a total chlorine level above 5 ppm, or poor sanitizer/pH levels. Adjust the water chemistry based on testing results. If the chlorine level is too high, apply an oxidizer/non-chlorine shock treatment. Also, adjust the pH level as necessary.
Why is my Master Spas Hot Tub water foaming?
Foaming in your Master Spas hot tub can occur due to high levels of body oils, lotions, soap, etc., low calcium hardness, or unbalanced water chemistry. Try adding a small amount of defoamer and an enzyme product, and check the water chemistry. If the calcium hardness is low, use a calcium hardness increaser. You may also need to test and adjust the chemistry levels.
What to do if Master Spas Hot Tub water is cloudy and green?
Cloudy and green water in your Master Spas hot tub often indicates low total alkalinity or low sanitizer levels. Use a pH increaser to address low alkalinity. Additionally, apply an oxidizer/non-chlorine shock treatment and adjust the sanitizer levels.
How to fix clear green water in Master Spas SEATTLE?
Clear green water in your Master Spas hot tub is often caused by high iron or copper content or low sanitizer levels. Use a sequestering agent to address the metal content. Also, apply an oxidizer/non-chlorine shock treatment to increase sanitizer levels.
How to remove scum deposits at waterline in Master Spas SEATTLE Hot Tub?
Scum deposits at the waterline of your Master Spas hot tub are typically caused by body oils and dirt. Clean the spa surface with a multi-purpose cleaner and add an enzyme product to the spa water.
Why is my Master Spas Hot Tub water brown?
Brown water in your Master Spas hot tub is usually due to a high iron or manganese level. Use a sequestering agent to treat the water.
How to remove chalky white scale deposits from Master Spas SEATTLE?
Chalky, white scale deposits in your Master Spas hot tub are caused by minerals in the water and a lack of sequestering agent use. When the tub is drained, use a multi-purpose cleaner or white vinegar and scrub the surfaces with a soft cloth.
General| Brand | Master Spas |
|---|---|
| Model | SEATTLE |
| Category | Hot Tub |
| Language | English |
To Next Page