69DO NOT DIVE.
SPA CONTROLS - ICON SPA TOUCH
ADDITIONAL SETTINGS
HOLD - M037*
The Hold Icon on the Settings Screen places the spa in Hold Mode and displays the System Hold
screen.
Hold Mode is used to disable the spa equipment during service functions like cleaning or replacing
the filter. Hold Mode will last for 1 hour unless the mode is exited manually. If spa service will
require more than an hour, it may be best to simply shut down power to the spa.
Touch Back to exit Hold Mode.
System Hold
Holding for 1:00
*M0XX is a Message Code. Codes like this will be seen in the Messages Log.
To Next Page
Loading...
