GLOSSARY OF SWIM SPA TERMINOLOGY
13
DO NOT DIVE.
14. SLICE VALVES
These valves are used by service personnel to shut off water to the heat-
er, main pump system and secondary pump system so that the water
does not need to be drained should the swim spa require service.
*NOTE: Slice valves must be completely open during normal
operation.
15. MAIN PUMP
The main pump produces water flow through the jets and has a high and low speed. Low speed
will produce efficient water circulation during filtration and gentle jet action. High speed should be
used for maximum jet action. The water flow may be directed to different areas of the swim spa
depending on the position of the diverter controls.
16. SECONDARY PUMP
This pump produces water flow through the stand up jet system.It also supplies water flow
to the swim jets or therapy jets depending on the position of the diverter valve. The second
pump can be controlled by the topside panel and also the personal remote mounted on the
surface of the swim spa.
17. PUMP UNION
These are used by service personnel to easily service the pumps.
18. HEATER UNION
These are used by service personnel to easily service the heater.
19. OZONATOR
Your onzonator will operate in conjunction with the filter system. Ozone is a powerful gas that
oxidizes contaminates in the water.
To Next Page
Loading...
