13
Le Master Heat Gun est un
pistolet à air chaud polyvalent
de capacité élevée et de qua-
lité industrielle. Doté de la
puissance et du débit supéri-
eurs propres aux appareils
MASTER, il permet
d’accomplir plus rapidement
les tâches industrielles
requérant des températures
élevées.
Sa puissance nominale peut
atteindre 1740 watts (120 volts)
et 2160 watts (240 volts).
Quant au débit d’air, il atteint en
moyenne 914 m/minute
(3 000 pi/min) pour ce qui est
de la vitesse, et 0,65m
3
/minute
(23 pi
3
/min) pour ce qui est du
volume. Combinés, tous ces
facteurs assurent une meilleure
performance à l’utilisateur final.
Vous pourrez utiliser votre
Master Heat Gun pour tous les
travaux « nécessitant une
source de chaleur rapide, por-
tative et sans flamme ».
Les pistolets à air chaud
constituent une source de
chaleur sans flamme extrêm-
ement élevée (jusqu’à
540°C/1 000°F). Comme pour
tous les appareils à haute
température et indépendam-
ment de la nature de votre
application particulière, une
prudence et un soin
extrêmes s’im posent lors de
l’utilisation de cet appareil.
Nous vous recommandons
donc d’accorder toute votre
attention aux consignes de
sécurité présentées dans ce
manuel pour votre protec-
tion.
DESCRIPTION ET INTRODUCTION
CARACTÉRISTIQUES
Dimensions ...........................longueur 20 cm x largeur 13 cm x hauteur 24 cm
(8” x 5-1/4” x 9-1/2”)
Diamètre de la buse .................................................3 cm (1-3/16”)
Débit moyen (vitesse) .....................914 m/mn (3000 pi/min) (température ambiante)
Débit moyen (volume) .....................0,65 m
3
/mn (23 pi
3
/min) (température ambiante)
Poids net .......................................................... 1,6 kg (3.5 lb)
Modèles 120V ..............................................................60 Hz
Modèles 220-240V ....................................................... 50/60 Hz
Longueur du cylindre de protection de la buse .........................10,6 cm (4-3/16”)
Longueur du cordon de raccordement ................................... 1,82 m (6 pi)
Plage de températures
Modèles °C °F Volts Amps Watts
HG-201A 93-150 200-300 120 5 600
HG-202A 93-150 200-300 220/240 3 720
HG-301A 150-260 300-500 120 12 1440
HG-302A 150-260 300-500 220/240 6 1440
HG-501A 260-400 500-750 120 14 1680
HG-502A 260-400 500-750 220/240 7 1680
HG-751B 400-540 750-1000 120 14,5 1740
HG-752A 400-540 750-1000 220/240 9 2160
ONE YEAR FULL WARRANTY
Some states do not allow limi-
tations on how long an
implied warranty lasts, so the
above limitation may not
apply to you.
Master Appliance assumes
no responsibility for and this
warranty shall not cover any
incidental or consequential
damages from any defect in
this product or its use. Some
states do not allow the exclu-
sion or limitation of incidental
or consequential damages,
so the above exclusion may
not apply to you.
This warranty gives you spe-
cific rights and you may also
have other rights which may
vary from state to state.
For warranty repair a proof
of purchase receipt or other
appropriate proof of date is
required with your return for
warranty repair to Master
Appliance. All warranty claims
Your Master Heat Gun
®
was
carefully tested and inspected
before it was shipped from the
factory. We warrant this prod-
uct to be free from defects in
materials and workmanship
under normal use and service
for one year from date of pur-
chase. In the event of a defect
in materials or workmanship,
we will either repair or replace,
without charge, at our option,
any part which in our judge-
ment shows evidence of such
defect.
This warranty does not apply
to the attachments, brushes,
commutator, bearings, or the
heating element, which are
items requiring periodic
replacement, nor does it
apply if the Master Heat Gun
®
has been misused, abused,
tampered with, or altered. At
the end of the warranty
period, Master Appliance
shall be under no further obli-
gation, expressed or implied.
must be made to Master
Appliance and not the distrib-
utor. We decline responsibility
where repairs have been
made or attempted by others.
Any different guarantee made
by others is not authorized by
us. If a warranty claim is to be
made please return your
Master Heat Gun
®
prepaid,
with proof of purchase and a
note describing the problem
to our Repair Department.
See below.
For repair service we charge
a flat rate fee. Please call
Master Appliance for the flat
rate charge, return your
Master Heat Gun prepaid,
with a note describing the
problem to:
Master Appliance Corp.
Attention: Repair Department
2420 18th Street
Racine, Wisconsin 53403
Phone (877) 250-1934
Fax (262) 633-9745
REPLACEMENT PARTS (cont’d)
12
Master heat gun replacement
parts and accessories are
engineered and manufac-
tured to precise Master
Appliance specifications.
Replacement parts and
accessories from other manu-
facturers are not produced to
these precise specifications
and, therefore, may cause dif-
ficulties with - or actual dam-
age to - a Master heat gun.
Master Appliance cannot
assume any responsibility or
liability for difficulties resulting
from the use of any other brand
or replacement parts or acces-
sories with a Master heat gun.
To Next Page
Loading...
