Mastercook Dishwasher - Switching Off and Cancelling Programmes

21
EN 11/ PROGRAMMING
Remarks:
The door’s electrical safety system can cause the indicator lights to illuminate briefly when
the door is opened or closed. This phenomenon does not affect your machine’s operation.
If required, and particularly after the water softener has been reset, the programme may start with
three minutes of resin regeneration. This is a silent operation.
• Switching off the appliance
When the program has finished, turn the selec-
tor to the
“Stop”
position. .
• Cancelling a programme
Hold down the “Start/
Pauza
” buttonfor a
few seconds; the programme stops and the
“ Remaining Time ” light goes out.
You can then reprogramme.
D
A