22
EN 12/ CLEANING YOUR APPLIANCE
Fig. 15
• CLEANING THE WASTE FILTERS
The filtration system consists of several
elements:
The micro filter.
The filters are located in the centre of the tub
and must be washed regularly to obtain
opti-
mum washing results.
Before removing the filters, remove any
waste on the large main filter with a
sponge so that the waste does not block the
sprinkler arms. Orient the
as shown
in the drawing. (Fig. 14)
Loosen the waste filter a quarter of a turn
and then remove it
.
Remove the micro filter screen
.
Carefully clean filters
,
and
under running water. (Fig. 15)
Reinstallation:
Proceed in reverse order, inserting filters
and and then .
Important :
Remember to lock the waste filter in
place by pushing it in fully and turning it
a quarter turn.