18 www.mastercool.com
COMMANDER2000 screen
o Automatic will inject the same amount of fresh oil that was recovered.
o Manual allows for pre-setting the amount of desired fresh oil, regardless of the amount
of oil recovered, use the keypad to set the amount.
o Disabling will turn off the oil injection function so that no oil is injected, regardless of
the amount of oil recovered. Press the round blue check button to turn it grey. Press this
button again to enable the function and turn it blue.
Press << to lock in the oil charge.
NOTE: The caution symbol will appear if the amount programmed exceeds the amount of oil
available. Add oil to the new oil bottles when necessary.
NOTE: Press the “C” on the keypad to clear any value to enter new value.
• REFRIGERANT CHARGE: Press the >> to set the refrigerant charge. Use the keypad to set charge or
choose the Database function (if available).
o Database function: Allows the user to choose the refrigerant charge based on the make,
model and year of vehicle. Press “Lookup” and choose the correct make year and
model. The refrigerant charge will be automatically programmed.
NOTE: The Caution symbol will appear if the programmed charge amount exceeds the available
amount. Add refrigerant, refer to tank filling.
NOTE: Press the “C” on the keypad to clear any value to enter a new value.
NOTE CONCERNING THE DATABASE: We have taken all due care in gathering and entering
information contained in the database. The database data may nevertheless be considered purely as
a reference, the manufacturer declines any and all responsibility for incorrect data.
To Next Page
Loading...
Need help?
General
