MasterCool MCP44

Skip to content
Manuals+
User Manuals Simplified.
MasterCool MCP44 Window Evaporative Cooler
Instructions
Home » Mastercool » MasterCool MCP44 Window Evaporative Cooler Instructions
PURGE CONVERSION INSTRUCTIONS FOR MCP44
Description: This document provides instructions for installing a water purge pump onto the MasterCool MCP44
window evaporative cooler.
CAUTION: Ensure unit is turned fully off and unplugged from the electrical outlet. Turn off and disconnect the water
source to the cooler unit before proceeding.
1. Remove back of cooler by extracting 2 screws from the top and 2 screws from the bottom of the cooler back.
2. Disconnect the water supply tube from the water distribution tray.
3. Remove existing hose assembly and replace it with a long piece of tubing from kit.

MasterCool MCP44 Specifications

General

Brand	MasterCool
Model	MCP44
Category	Freezer
Language	English

Summary

Purge Conversion Instructions for MCP44

Document Overview and Safety Precautions

Provides instructions for installing a water purge pump and emphasizes safety before proceeding.

Disassembly and Initial Setup

Instructions for removing the cooler back, disconnecting the water supply tube, and replacing the hose.

Pump and Hose Assembly

Steps for attaching the pump bracket, securing the pump assembly, and connecting the purge hose.

Electrical Connection and Reassembly

Guide to connecting the purge pump cord, replacing covers, and reconnecting water and power.