INSTALLING IMPACT SOCKETS
WARNING: Use only impact
sockets and accessories that are
designed for use with an impact
wrench. Do not use chrome plated
sockets and accessories. Chrome plated
sockets and accessories are designed for
hand use only and MUST NOT be used
with an impact wrench. They may shatter
and possibly cause serious injury.
WARNING: Always remove the
battery from the tool before changing any
sockets or accessories. You may injure
your hand if the tool is started accidentally.
To install a socket, press the square
portion of the socket (1) onto the square
drive (2) of the impact wrench (Fig. 5).
NOTE: Slide the socket fully onto the
square drive so the socket retainer (3) will
hold the socket firmly in place
FORWARD/REVERSE BUTTON
This impact wrench is equipped with a
forward/reverse button (1) (Fig. 6).
1. To operate the impact wrench in the
reverse direction, press the
forward/reverse button to the RIGHT.
This direction of rotation will loosen
the fastener.
2. To operate the impact wrench in the
forward direction, press the
forward/reverse button to the LEFT.
This direction of rotation will tighten
the fastener.
To Next Page
Loading...
Need help?
General