FORWARD/REVERSE BUTTON – cont’d
NOTE: Never press the forward/reverse
button while the impact wrench it turned
ON. Damage to the tool will result.
VARIABLE SPEED TRIGGER SWITCH
This impact wrench is equipped with a
variable speed ON/OFF trigger switch.
1. To start the impact wrench, gently
squeeze the trigger switch (2) (Fig. 7).
NOTE: The impact wrench will turn at its
slowest speed when the trigger switch is
depressed slightly. The impact wrench will
turn at its fastest speed when the trigger
switch is fully depressed.
2. To stop the impact wrench, release
the trigger switch.
NOTE: Never allow your hand to cover the
air vents of the impact wrench. Running
the tool at slow speeds will cause it to heat
up. If the tool gets warm while running at
slow speeds, stop and allow it to cool.
To Next Page
Loading...
Need help?
General