MasterCraft 054-8223-4 User Manual

ORBITAL JIGSAW WITH LASER LINE - 054-8223-4ORBITAL JIGSAW WITH LASER LINE - 054-8223-4
7 8
CAUTION!
Always follow the instructions in this manual when using this laser. The use of this feature
in any manner other than what appears in this manual may result in hazardous radiation
exposure.
• Donotattempttomodifytheperformanceofthislaserdeviceinanyway.This may result
in a dangerous exposure to laser radiation.
• Useonlytheaccessoriesthatarerecommendedbymanufacturerforusewiththismodel. The
use of accessories that have been designed for use with other laser tools could result in serious injury.
Safety instructions for the orbital jigsaw
DANGER!
Keep hands away from cutting area and blade.
CAUTION!
Blades coast after saw is switched off.
• Keepyourbodypositionedtoeithersideofthesawblade,butnotinlinewiththesawblade.
• Donotreachunderneaththework.The blade guard cannot protect you from the blade
underneath the work.
• Donottouchthebladeortheworkpieceimmediatelyafteroperation. They may be
extremely hot and could burn your skin.
• Donotcutanoversizedworkpiece.
• Checkforproperclearanceundertheworkpiecebeforecuttingsothatthebladewillnot
striketheworkbenchormaterialundertheworkpiece.
• Makesurethebladeisnotcontactingtheworkpiecebeforetheswitchisturnedon.
• Holdthetoolbytheinsulatedgrippingsurfaces(handles)whenperforminganyoperation
wherethecuttingtoolmaycontacthiddenwiringoritsowncord. Cutting accessory
contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the
operator an electric shock.
• Useclampsoranotherpracticalwaytosecureandsupporttheworkpiecetoastableplatform.
Holding the work by hand or against your body leaves it unstable and may lead to loss of control.
• Whenripping,alwaysusearipfenceorstraightedgeguide.This improves the accuracy of the cut
and reduces the chance of the blade binding.
Safety instructions for lasers
This orbital Jigsaw has a built-in laser light. The laser is a Class Illa, and emits a maximum output
power of 2.5 mW at 650nm wavelengths. These lasers do not normally present an optical hazard.
However, do not stare at the beam, because this can cause flash blindness.
Thefollowinglabelisonyourtool.Itindicateswhere
thesawemitsthelaserlight.Beawareofthelocationof
thelaserlightwhenusing.Alwaysmakesurethatany
bystandersinthevicinityofusearemadeawareofthe
dangersoflookingdirectlyintothelaser.
WARNING!
Laserlight.Laserradiation.Avoid direct eye exposure. Do not stare into beam. Only
turn laser beam on when the saw is on the workpiece. Class Illa laser.
WARNING!
The use of controls, adjustments or performance of procedures other than those specified
in this manual may result in hazardous radiation exposure.
WARNING!
The use of optical instruments to view the laser beam, including but not limited to
telescopes or transits, will increase eye hazard.
• Donotremoveordefaceanyproductlabels. Removing product labels increases the risk of
exposure to laser radiation.
• Thelaserbeamcanbeharmfultotheeyes. Always avoid direct eye exposure. Do not look
directly into the laser beam output aperture during operation. Do not project the laser beam directly
into the eyes of others. Turn the laser on only when making cuts.
• ThelaserontheorbitalJigsawisnotatoy.Always keep out of the reach of children. The laser
light emitted from this device should never be directed toward any person for any reason.
• Besurethelaserbeamisaimedataworkpiece(suchaswoodorroughcoatedsurfaces)
thatdoesnothaveareectivesurface.
• Donotuseonsurfaceslikesheetsteelthathaveashiny,reectivesurface.The shiny
surface may reflect the beam back at the operator. Be aware that laser light reflected off a mirror or
any other reflective surfaces can also be dangerous.
• Alwaysturnthelaserbeamoffwhennotinuse. Leaving the tool on increases the risk of
someone inadvertently staring into the laser’s beam.
SAFETY GUIDELINES SAFETY GUIDELINES

MasterCraft 054-8223-4 Specifications

General

Brand	MasterCraft
Model	054-8223-4
Category	Power Tool
Language	English