headline bars
continuation tabs
notes
warnings
model no. 058-0051-2 | contact us 1-800-689-9928
4 5
SPECIFICATIONS
SPECIFICATIONS
Feed type Siphon feed
Air brush nozzle diameter 0.35 mm
Interchangeable glass jars 22 cc (x2)
Air inlet 1/4" NPT
Operation pressure 15 – 50 PSI
SAFETY GUIDELINES
This air brush kit gives you the tool to increase capabilities of detail spraying a variety of inks and paints. It
is great for the handyman, craftsman, hobbyist, and “Do-It-Yourselfer”.
• Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of
electric shock, fire and injury to persons.
• Keep bystanders, children and visitors away while operating the tool. Do not use this product
with other people, children or pets in the work area.
• Stay alert. Watch what you are doing and use common sense when operating the tool. Do not use the
tool while tired or under the influence of drugs, alcohol, or medication.
• Dress properly. Do not wear loose clothing or jewellery. Keep long hair and gloves away from moving
parts.
• Do not overreach. Keep proper footing and balance at all times.
• Use a face mask/respirator and wear safety goggles when spraying. Always spray in a
well-ventilated area to prevent health and fire hazards. Refer to Material Safety Data (MSDS) of spray
materials for details.
• Never use oxygen, carbon dioxide, combustible gases or any bottled gas as an air source
for the tool. Use only clean, dry, regulated compressed air at the rated pressure or within the rated
pressure ranges for best air brush performance and extending air brush life.
• Keep hose away from sharp objects. Bursting air hose could result in personal injury. Examine air
hoses regularly and replace them if damaged or broken.
• Check for misalignment or binding of moving parts, breakage of parts, and any other
condition that affects the tool’s operation. If damaged, have the tool serviced before using.
• Always use air brush at a safe distance from other people in the work area.
• Do not aim the air brush at any dust or debris to avoid any damage to workpiece.
• Never aim or spray at yourself or anyone else, which could result in serious injury.
• Do not operate the tool if it is damaged during shipping, handling or use. Damage could result
in bursting and cause injury and/or property damage.
• Do not spray acids, corrosive materials, toxic chemicals, fertilizers or pesticides. Using these
materials could result in death or serious injury.
• Do not use pressure exceeding the operating pressure of any of the parts (hoses, fittings,
etc.) in the painting system.
• Do not smoke in or near the work area. Always keep a fire extinguisher present in the work area.
• During cleaning and flushing, solvents can be forcefully expelled from liquid and air
passages which could cause eye injury. Be sure that all others in the area are wearing impact-
resistant eye and face protection. Even small objects can injure eyes and cause blindness.
SAFETY GUIDELINES
To Next Page
Loading...
Need help?
General
