TYPES OF NAILS
14
AIR-POWERED COIL ROOFING NAILER 058-8179-2
This Mastercraft® Coil Roofing Nailer drives full-head or round-head 3/4 to 1 3/4" (19 to 45 mm)
long nails. The nails are to be collated at 15°.
ACCEPTABLE NAILS
The nailer can be used with a variety of shank types (e.g., ring, smooth, spiral) and a variety of
coatings or nail compositions (e.g., Electro, mechanical, or hot-dipped galvanized or stainless steel).
NAIL TYPE ICONS
These Icons are used to select the proper nails for this specific nailer.
Note: Icons are colour coded, please refer the actual tool for the specific colour.
Length: 3/4 - 1 3/4
"
(19 to 45 mm)
Angle: 15°
WARNING!
Potential hazard that could result in serious injury or loss of life.
• The use of any other types of nails will cause the nailer to jam and could lead to
serious injury or loss of life.
3/4”
1 3/4”
MC-588179-15
MC-588179-08
To Next Page
Loading...
