MasterCraft 058-8179-2 User Manual

MAINTENANCE
21
AIR-POWERED COIL ROOFING NAILER 058-8179-2
Maintenance
DANGER!
Potential hazard that will result in serious injury or loss of life.
• Disconnect the tool from the air compressor before performing maintenance
service, adjusting, clearing jams, reloading, and when it is not in use.
• Repairs must be performed by a qualified service technician only. Failure to
comply will lead to serious injury or loss of life.
MAINTENANCE
REQUIRED
DESCRIPTION
TOOLS OR
MATERIALS
REQUIRED
MAXIMUM SERVICE INTERVAL
Each Use or
every 2 Hrs.
Monthly
As
Needed
General inspection -
free movement
Trigger, spring,
safety mechanism
None X
In-depth inspection
Worn or broken
parts
X X
Replace worn or
broken parts
X
Lubrication See below
Pneumatic tool
oil
X
• Lubrication: If the Air-powered Coil Roofing Nailer
and the compressor are not equipped with an
in-line lubrication system, place up to 6 drops of
pneumatic tool oil into the air inlet before each
work day or after every 2 hours of continuous use,
depending on the characteristics of the workpiece
and type of nails used.
MC-588179-20

MasterCraft 058-8179-2 Specifications

General

Brand	MasterCraft
Model	058-8179-2
Category	Nail Gun
Language	English