MasterCraft 058-8179-2 User Manual

OPERATING INSTRUCTIONS
17
AIR-POWERED COIL ROOFING NAILER 058-8179-2
7. Test the driving depth by pressing the
trigger (1) with the safety stand pressed
on a sample piece of wood before
working on the workpiece. If the nails
are being driven too deep or not deep
enough, adjust the regulator in order to
provide more or less air pressure, as
required
(fig G) .
MC-588179-09
1
fig G
WARNING!
Potential hazard that could result in serious injury or loss of life.
• The safety stand must be in contact with the workpiece before activating the
tool.
• Do not operate the tool if the nails are not loaded, as doing so may damage
the tool.
• Do not fire nails into the air, as doing so may cause injury to the operators
or others, apart from damaging the tool.
• Do not load different sized nails into the magazine, as doing so may cause
nails to jam. Failure to comply could lead to serious injury or loss of life.

MasterCraft 058-8179-2 Specifications

General

Brand	MasterCraft
Model	058-8179-2
Category	Nail Gun
Language	English