MasterCraft 058-8194-4 User Manual

QUICK START GUIDE
FLUX-CORE WIRE FEED WELDER KIT 058-8194-4
STEP 1
Installing the wire
Remove the nozzle (1) and contact tip (2) from
the end of the torch assembly. Ensure proper
groove on the drive roller is in place for the
wire to be installed. Remove the packaging
from the wire spool and identify the leading
end of the wire secured on the edge of the
spool. page 15
STEP 2
Setting wire tension
Press the trigger on the gun. Turn the drive
tension adjustment knob (1) clockwise, and
increase the drive tension until the wire seems
to feed smoothly without slipping.
page 17
MC-588194-06
1
2
MC-588194-08
1

MasterCraft 058-8194-4 Specifications

General

Brand	MasterCraft
Model	058-8194-4
Category	Welding System
Language	English