24
AIR-POWERED CLIPPED-HEAD FRAMING NAILER 058-8434-4
• Air-operated tools must be inspected periodically and worn or broken parts must be replaced
in order to keep tools operating safely and efficiently.
• Inspect and replace worn or damaged O-rings, seals, etc. Tighten all screws and caps
frequently in order to help prevent personal injury.
• Inspect the trigger, spring, and safety mechanism for free movement on a regular basis in
order to ensure that the safety system is fully functional. Verify that no parts are loose or
missing and no parts are sticking or jammed.
• Keep the magazine of the tool clean and free of any dirt or abrasive particles.
N
ote: When temperatures are below freezing, maintain the tools in a warm condition using any safe,
convenient method.
To Next Page
Loading...
Need help?
General
