• This submersible sump pump is designed for home sump applications. Use this pump only for
pumping water.
• This unit is not designed as a waterfall or fountain pump, or for applications involving salt water
or brine. Use with waterfalls, fountains, salt water or brine will void warranty.
• Do not use where water recirculates.
• Not designed for use as a swimming pool drainer.
Flat-head screwdriver
Threaded adaptor
(pipe to pump)
1 1/4" (3.2 cm) or
1 1/2" (3.8 cm)
check valve
1 1/4" (3.2 cm) or
1 1/2" (3.8 cm)
ABS or PVC pipe
Hacksaw Cable ties Safety goggles Tape measure
Cross-head screwdriver Channel lock pliers Pipe wrench
12
ASSEMBLY PREPARATION
ABS or PVC cement
(to match the pipe)
Thread tape
1 1/4" (3.2 cm) or
1 1/2" (3.8 cm)
90° elbow
APPLICATION
TOOLS REQUIRED
MATERIALS REQUIRED (NOT INCLUDED)
model no. 062-3535-2 | contact us 1-800-689-9928
To Next Page
Loading...
