To Next PageTo Next Page
Need help?Do you have a question about the MasterCraft 062-3410-8 and is the answer not in the manual?
General| Model | 062-3410-8 |
|---|---|
| Category | Water Pump |
| Power Source | Electric |
| Voltage | 120V |
| Maximum Flow Rate | 1800 GPH |
| Maximum Lift Height | 25 ft |
| Discharge Size | 1-1/4 in |
| Automatic Operation | Yes |
| Thermal Protection | Yes |
| Construction Material | Thermoplastic |
| Hose Diameter | 1-1/4 in |
| Type | Submersible |
Details on motor horsepower, voltage, amps, phase, RPM, type, insulation, circuit requirements, duty rating, shaft seal, bearings, cooling, and protection.
Details on pump discharge size, cord length/type, housing, base, impeller material, gasket, solids handling, liquid temperature range, operation, fasteners, max flow rate, head, pressure, and weight.
Displays pump flow rate (GPH/L/hr) at various lift heights (feet/meters), excluding friction loss.
Visual representation and measurements of the submersible utility pump, including height and width of the main unit and base.
Crucial warnings regarding electric shock, hazardous locations, flammable fluids, water use, extension cords, and proper grounding.
Instructions for inspecting the pump for damage or missing parts upon receipt and contacting customer support if issues arise.
Steps for attaching hose adaptors, connecting hoses, and positioning the pump on a suitable surface to prevent clogging or damage.
Guidance on connecting to power, understanding water drainage, avoiding dry running, the anti-airlock hole, and thermal overload protection.
Clarifies liability for other expenses or damages and states the warranty applies only to the original purchaser.
Informs consumers of their specific legal rights and how they may vary by province, not limiting statutory warranties.
