Need help?Do you have a question about the MasterCraft 062-3420-4 and is the answer not in the manual?
General| Model | 062-3420-4 |
|---|---|
| Category | Water Pump |
| Power Source | Electric |
| Voltage | 120V |
| Max Flow Rate | 1800 GPH |
| Max Head | 25 ft |
| Cord Length | 10 ft |
| Auto On/Off | Yes |
| Thermal Protection | Yes |
| Construction | Thermoplastic |
| Maximum Pumping Height | 25 ft |
| Maximum Flow Rate | 1800 GPH |
| Hose Diameter | 1-1/4 in |
| Type | Submersible |
| Discharge Size | 1.25 in |
Important notes regarding pipe threading compound and check valve installation for proper operation.
Details on liquid temperature, impeller, discharge size, seal, cord length, and bearings.
Information on HP, voltage, frequency, RPM, amps, and cord size/type.
Data showing pump flow rate (GPH/LPH) at different lift heights (feet/metres).
Provides detailed physical measurements of the pump and its fittings.
Essential safety rules for operating the pump and protecting personnel.
Critical safety alerts for fire, explosion, electric shock, and burn hazards.
Important advice on pump handling, securing, inspection, and operation.
Procedures for inspecting the pump upon receipt and guidelines for storing it.
References for discharge and electrical connection steps for installation.
Steps including wire size, voltage, phase, insulation, and pump-down tests.
Note pump's identification plate details for future reference.
A list of all supplied components with their descriptions and quantities.
A visual representation of the pump and its associated fittings.
Explains the intended use of the pump with sinks where gravity drain is unavailable.
Lists the necessary tools for assembling and installing the pump.
Details the fittings included with the pump and those that must be purchased separately.
Step-by-step instructions for physically mounting the pump to the sink drain.
Critical considerations and hazards related to the installation process.
Detailed steps for connecting the discharge piping to the pump and building drain.
Specific advice on check valve installation and pipe connection tightness.
Instructions for connecting the pump to a GFCI-protected outlet.
Method for adjusting the ball valve to ensure continuous pump operation.
Guidance on using the pump with washing machine discharge, including lint management.
Procedure to disassemble, clear, and reassemble the pump for impeller blockages.
Safety advice for lifting the pump and avoiding burns during maintenance.
A table addressing problems like non-operation, poor emptying, and cycling with causes and fixes.
Details what the product warranty covers and explicitly excludes.
Further restrictions on warranty applicability and liability.
Information on statutory rights granted by the warranty.
To Next Page