Need help?Do you have a question about the MasterCraft 062-3593-2 and is the answer not in the manual?
General| Model | 062-3593-2 |
|---|---|
| Power Source | Electric |
| Voltage | 120 V |
| Inlet/Outlet Size | 1-1/4 in |
| Thermal Protection | Yes |
| Maximum Pumping Height | 25 ft |
| Hose Diameter | 1-1/4 in |
| Max Head | 25 ft (7.6 m) |
Step-by-step guide for installing the shallow well jet pump.
Instructions for setting up the pump as a typical household booster.
Specifications for the pump's motor, including HP, voltage, RPM, and amps.
Provides pump performance data based on lift height and physical dimensions.
Safe practices for unpacking, storing, and handling the pump to prevent damage.
Guidelines for safe installation, suction setup, and electrical connections.
Essential checks before operation, including wiring, voltage, testing, and maintenance advice.
Key advice for operating the pump correctly and avoiding common issues.
A list identifying all components of the pump with corresponding numbers.
Covers required materials, tools, well depth, pump location, and tank selection.
Detailed sequential instructions for physically installing the pump and related piping.
Instructions for installing and understanding the automatic pressure controller.
How the pump operates normally, including start-up and pressure regulation.
Explains when and why the pump stops, including 'no water' conditions and restart.
Details on the motor and pump seal lubrication, noting factory pre-lubrication.
Diagnosing and resolving issues when the pump motor fails to start or run.
Troubleshooting causes for motor overheating, overload tripping, or humming.
Steps to take when the pump runs but delivers no water.
Identifying and fixing problems that cause the pump to deliver less water than expected.
Details the conditions under which the product warranty is valid or void.
Information on consumer legal rights and specific notices related to the warranty.
To Next Page