REMOVING FASTENERS
One of the most common uses for the
impact wrench is to remove car wheel nuts
for rotating the tires. Car wheel nut
removal is used for illustrative purposes.
DANGER: Before attempting to
remove a car wheel, make sure all
jacking, wheel blocking and wheel
removal safety procedures illustrated in
the Owner’s Manual for your car are
followed exactly. Failure to follow those
safety instructions could result in
serious injury or death.
For safety reasons, the operator
must read the sections of this
Owner’s Manual entitled “GENERAL
SAFETY WARNINGS”, “POWER
TOOL SAFETY”, “SPECIFIC SAFETY
RULES”, “EXTENSION CORD
SAFETY” and “SYMBOLS” before
using this impact wrench.
Verify the following every time the
impact wrench is used:
1. Safety glasses and hearing
protection are being worn.
2. Socket or accessory is “impact
wrench” rated.
3. Socket or accessory is in good
condition.
Failure to observe these safety rules
will significantly increase the risk of
injury.
To Next Page
Loading...
Need help?
General
