for this prole. Touch the UP arrow to in-
crease the speed or the DOWN arrow to
decrease the speed shown.
Touch [NEXT] to continue setting in
this prole, [PREVIOUS] to go back to
the last screen, or [CANCEL] to go back
to the main Proles screen.
Set the tabs by either touching and slid-
ing the nger down the ridged area or by
touching the UP or DOWN arrows next to
the ridged area.
Touch [NEXT] to continue.
Set the ballast tanks by touching and
sliding the nger up the tank areas or by
touching the UP and DOWN arrows along-
side the tank area.
Touch [NEXT] to continue.
Review the Prole settings.
Touch [SAVE] to save the prole and re-
turn to the main Proles screen, which will
display the new prole. Touch [ACTIVATE]
to activate the settings for this prole.
Gauges & Video Screens • 2014 MasterCraft Owners Manual Page 3-21
G A U G E S & V I D E O S C R E E N S
To Next Page
Loading...
Need help?
General
