The XSeries 7” video touch screen is
a multi-functional tool that provides GPS
tracking, multi-media display, cruise con-
trol, rider proles, and enables equipment
operators to view a wide range of engine,
ballast, transmission parameters and ser-
vice codes.
Care and Maintenance
Only basic cleaning should be required
to maintain the 7” video touch screen at its
best. A soft cloth can be used for cleaning
the units. Typical window cleaner or rub-
bing alcohol can also be used to clean the
glass portion of the video screen display.
Do not use harsh or abrasive cleaners on
the unit.
Avoid contact between sharp or hard ob-
jects and the video touch screen because
this can result in scratches or other perma-
nent marks on the screen. Clean only with a
sof cloth, using window cleaner or rubbing
alcohol only. Never use harsh or abrasive
cleaners on the unit, as this may result in
damage to the unit that is not covered un-
der warranty.
Page 3-16 2014 MasterCraft Owners Manual • Gauges & Video Screens
G A U G E S & V I D E O S C R E E N S
XSeries
Video Screen
Operations
7” Screen
Basic Navigation Features
All features are easily accessible through
the quick access keys, touch point com-
mands and menus.
Quick Access Keys
The following controls are accessible
through the quick access keys:
• Audio
• Ballast/trim
• Gauges
• Video
• Settings menu
• GPS
• User proles
• Cruise ON/OFF
• Increase value
• Decrease value
All of these keys, as shown, are called
quick access keys because a new screen
can be called up immediately, without go-
ing through other screens, by pressing on
that key.
To Next Page
Loading...
Need help?
General
