headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 054-7296-6 | contact us 1-800-689-9928
14
TROUBLESHOOTING
Problem Possible Causes Solution
The motor is overheating.
Be sure the cooling vents
are free from dust and
obstacles.
Clean and clear the vents. Do not
cover the vents with your hand during
operation.
The sander does not start.
Sander is not connected to
power source.
Plug the sander into a power source.
Unsatisfactory sanding
result.
The sanding paper is worn. Replace with a new sanding paper.
The sanding paper is not
suitable for the workpiece.
Use the correct sanding paper.
If the problem remains unsolved after performing the checks described above, call the toll-free helpline
at 1-800-689-9928.
TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
