MasterCraft 2112.1 User Manual

headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 054-7296-6 | contact us 1-800-689-9928
8
SAFETY GUIDELINES
ADDITIONAL SAFETY GUIDELINES FOR THE SANDER
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
................. Alternating current
n
0
................... No-load speed
............... Class II Construction
…/min or min
-1
............... Revolutions or reciprocation per minute
OPM ............... Oscillations per minute
.............. WARNING – To reduce the risk of injury, user must read instruction manual.
.............. WARNING –To reduce the risk of injury, always wear eye protection.
.............. WARNING – To reduce the risk of injury, always wear ear protection.
• A suitable breathing respirator must be worn while sanding lead paint, some woods
and metal to avoid breathing the harmful/toxic dust or air.
• Always wear safety goggles and a dust mask when sanding, especially when sanding
overhead.
• The machine is not suitable for wet sanding.
• Do not use sanding paper that is larger than needed. Extra paper extending beyond the
sanding pad can cause serious lacerations.
• Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more
securely than by hand.
• Attach the dust canister to the tool and empty it frequently. Do not throw sanding dust on
an open fire, because materials in fine particle form may be explosive.
• Protect your hearing. Wear appropriate personal hearing protection during use. Under some
conditions and duration of use, noise from this product may contribute to hearing loss.

MasterCraft 2112.1 Specifications

General

Brand	MasterCraft
Model	2112.1
Category	Sander
Language	English