17
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
MAINTENANCE
General maintenance
WARNING!
To avoid personal injury, always remove the battery pack from the tool when cleaning or
performing any maintenance.
WARNING!
Do not let brake uids, gasoline, petroleum-based products, penetrating oil, etc. come into
contact with plastic parts. These substances contain chemicals that can damage, weaken, or
destroy plastic.
The tool may be cleaned most effectively with compressed dry air. Always wear safety
goggles when cleaning tools with compressed air.
Before each use:
• Inspect the cordless drill/driver, the trigger switch, and the cord for damage.
• Check for damaged, missing, or worn parts.
• Check for loose screws, misalignment or binding of moving parts, or any other condition
that may affect the operation.
• If abnormal vibration or noise occurs, turn the cordless drill/driver off immediately, and
have the problem corrected before further use.
WARNING!
When servicing, use only identical replacement parts. The use of any other parts may create a
hazard or cause damage to the product.
WARNING!
Use only accessories that are recommended for this drill/driver by the manufacturer.
Accessories that may be suitable for one tool may become hazardous when used with another
tool.
WARNING!
To ensure safety and reliability, all repairs should be performed by a qualied service
technician.
To Next Page
Loading...
Need help?
General
