19
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
PROBLEM POSSIBLE CAUSES SOLUTIONS
The drill/driver does
not work.
The battery is depleted. Charge the battery.
The bit cannot be
installed.
1. The chuck is not opened. 1. Open the chuck.
2. The bit does not t the chuck. 2. Use a suitable bit.
The motor is overheating.
Be sure the cooling vents are free from dust
and obstacles.
Clean and clear the vents. Do not cover with
your hand during operation.
If the problem remains unsolved after performing the checks described above, call the toll-free helpline at
1-800-689-9928.
TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
