MasterCraft 55-5504-2 - Assembly and Adjustments; Unpacking and Initial Setup

Unpacking (Fig. 1)
Carefully unpack the planer and all its parts, and compare it to the list below. Do not discard
the carton or any packaging until the planer is completely assembled.
Fig. 1
1. Planer
2. Knife depth/alignment tool
3. Hex key
4. Knife alignment wrench
5. Rubber feet (4)
6. Hex screw for cutterhead
depth adjustment handle
7. Cutterhead depth
adjustment handle
8. Spare set of blades
9. Power cord
1
9
2
3
4
5
6
7
8
WARNING:
IF ANY PART IS MISSING OR DAMAGED, DO NOT PLUG IN THE PLANER
UNTIL THE MISSING OR DAMAGED PART IS REPLACED.
VI. Assembly and adjustments
12