MasterCraft Hawkeye Laser 54-8347-0 User Manual

1
OPERATING MANUAL
7 1/4" Circular Saw with Laser Line
54-8347-0
Specifications:
Motor: 120 V 60 Hz 14 A
No-load speed: 5500 RPM
Blade: 7 1/4"(24-tooth)
Cutting angle: 0-45°
Depth of cut at 90°: 2 1/2" (63.5 mm)
Depth of cut at 45°: 1 13/16" (46 mm)
Laser
: Class IIIa
Wavelength: 650 nm
Maximum output: ≤2.5 mW
Weight: 11 lb 2 oz (5.05 kg)
IMPORTANT:
Read through this operating manual carefully before using your new tool. Pay close attention
to all Safety Instructions, Warnings, and Caution sections. Use your tool properly, and
only for its intended purpose.
Safety symbols in this manual are used to indicate possible dangers. The safety
symbols and their explanations require your full understanding. The safety warnings do not
eliminate any danger by themselves, and they are not substitutes for proper accident
prevention measures.
This Safety Alert Symbol indicates caution, warning, or danger. Failure to obey a
safety warning can result in serious injury to yourself or to others. To reduce the risk of injury,
fire, or electric shock, always follow the safety precautions.

MasterCraft Hawkeye Laser 54-8347-0 Specifications

General

Brand	MasterCraft
Model	Hawkeye Laser 54-8347-0
Category	Saw
Language	English

Summary

Rules for Safe Operation

Know Your Tool

Understand the tool's components and manual before operation.

General Safety Precautions

General safety guidelines for operating power tools to prevent accidents.

Electrical Safety

Electrical Safety Precautions

Safety measures for electrical connections, grounding, wet conditions, and cord usage.

Additional Safety Rules for Laser Lights

Laser Safety Rules

Guidelines for safe laser operation, avoiding direct eye exposure and proper beam aim.

Specific Safety Rules for Circular Saw

Circular Saw Safety Precautions

Essential safety practices for operating the circular saw, including hand placement and guard usage.

Operation

Know Your Circular Saw

Familiarize yourself with the saw's features and safety requirements before use.

Assembly and Adjustments

Procedures for setting up and adjusting the saw before operation.

Parallel Cuts

Using the parallel fence guide to make consistent width cuts.

Adjusting the Cutting Depth

How to set the saw blade depth for optimal cutting performance.

Adjusting the Cutting Angle

Procedure for setting the saw's bevel angle for angled cuts.

Maintenance

Routine checks and upkeep for the circular saw.

Warranty