To Next PageTo Next Page
Need help?Do you have a question about the MasterCraft 54-8333-2 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Blade Size | 7-1/4 inches |
| Blade Diameter | 7-1/4 inches |
| Arbor Size | 5/8 inches |
| Max Cutting Depth at 90° | 2-7/16 in |
| Max Cutting Depth at 45° | 1-3/4 inches |
| Motor Power | 15 Amp |
Comprehensive safety guidelines for operating power tools safely and preventing hazards.
Further personal safety measures including proper footing, balance, and use of safety equipment.
Safety precautions related to electrical hazards, including proper use of plugs and cords.
Advice on staying alert, dressing appropriately, and avoiding distractions while operating the tool.
Emphasizes wearing safety goggles compliant with ANSI Z87.1 to prevent eye injuries from flying debris.
Advises using hearing protection and a dust mask to safeguard against noise and dust exposure.
Critical safety instruction to keep hands clear of the blade's cutting path to prevent severe injury.
Crucial step to unplug the tool before making adjustments or changing blades to prevent accidental starts.
Warning about the laser beam's danger to eyesight and advising against staring directly into it.
Safety alert regarding laser beam exposure to children, which can cause serious eye injury.
Crucial safety warning about not using the tool if parts are missing or damaged.
Safety warning against using specific flammable or toxic solvents for cleaning the tool.
Continues the instructions for cutting operations, including blade speed and depth control.
Detailed steps for performing cutting operations without using the edge guide.
Important warning that the tool is for straight cuts only and cutting curves can cause damage or injury.
Warning about potential damage and injury from using the wrong type of blade.
Crucial safety advice to use both hands for better control and safety during cutting.
Safety reminder to ensure the blade guard is in its proper position after cutting.
A critical safety warning reminding users to read all safety sections before operating the tool.
Instructions for performing cutting operations using the edge guide for precise width control.
Critical safety reminder to disconnect power before any blade adjustments or changes.
Warning about the sharpness and heat of blades, advising caution during handling.
Critical safety warning to turn off the laser before inserting batteries to prevent eye injury.
Strict safety warning against directing the laser beam at people, which can cause eye damage.
Critical warning to use only OEM parts to avoid hazards and damage.
Strong warning against modifying the tool, which voids warranty and can be hazardous.
Reinforces the importance of using only manufacturer-approved parts for servicing.
