Need help?Do you have a question about the MasterCraft MAXIMUM 055-6768-8 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Amperage | 15 A |
| Blade Diameter | 7-1/4 inches |
| Arbor Size | 5/8 in |
| Max Cutting Depth at 90° | 2-7/16 inches |
| Max Cutting Depth at 45° | 1-3/4 inches |
Ensure accessories and blade are correctly installed and tight before use.
Use hold-down clamp to secure workpiece against fence for stability.
Position and secure bowed workpieces against fence before cutting.
Adjust laser guide for pre-alignment of cuts.
Keep hands at least 22 cm (8 3/4") away from the blade.
Explanation of warning icons and safety alert symbols used in the manual.
Essential safety practices for operating power tools safely.
Emphasis on wearing eye protection and other safety gear.
Key safety rules for operating the mitre saw.
Precautions for electrical connections, power supply, and insulation.
Guidelines for selecting and using appropriate extension cords.
Lists of tools provided with the saw and those needed for assembly.
Diagrams and descriptions identifying parts of the sliding mitre saw.
Further diagrams and descriptions of the mitre saw's parts.
Definitions of terms related to woodworking and the mitre saw.
Definitions of terms related to woodworking and the mitre saw.
Instructions for unpacking and checking the contents of the saw's carton.
Instructions for positioning cutting head and installing dust bag.
Procedures for installing handles and the hold-down clamp.
Steps for safely removing and installing the saw blade.
Instructions for removing and installing the table inserts.
Guidance for securely mounting the saw for stationary use.
Instructions for portable mounting and storage of accessories.
Procedures for setting 0° bevel stops and pointer alignment.
Procedures for setting 45° bevel positive stops.
Procedures for setting 33.9° bevel stops.
Adjusting mitre scale pointer and checking fence squareness.
Setting cutting depth and aligning the laser guide for precision.
Adjusting extension wings and using stop plate for repetitive cuts.
Essential safety checks and procedures before operating the saw.
Guidelines for using accessories and maintaining a clean work area.
Tips for planning cuts, dressing safely, and inspecting workpieces.
Precautions for freehand cutting, large workpieces, and non-ferrous metals.
Proper body/hand positioning and procedures during operation.
Starting the saw and operating the sliding fence.
Using carriage, mitre lock, and performing specific cuts like grooves and moulding.
Procedure for inspecting and replacing motor carbon brushes.
Cleaning the blade guard and removing sawdust for proper function.
Identifying and lubricating key pivot points for smooth operation.
Diagnosing and resolving common motor problems.
Troubleshooting common issues with saw performance and cut accuracy.
To Next Page