Need help?Do you have a question about the MasterCraft 055-6761-2 and is the answer not in the manual?
General| Brand | MasterCraft |
|---|---|
| Model | 055-6761-2 |
| Category | Saw |
| Language | English |
Comprehensive safety advice for all power tools.
Guidelines for maintaining a safe and productive work environment.
Precautions to prevent electric shock when using power tools.
Advice on maintaining alertness and preventing injury during operation.
Specifies the designed application for the mitre saw.
Instructions for securely attaching the tool to a work surface.
Guide on how to attach and use the workpiece clamp.
Steps to attach and secure the sliding fence for cuts.
Procedure for attaching extension tables for wider workpieces.
Step-by-step guide for safely installing the saw blade.
Instructions for attaching the dust collection bag.
Recommendations for safely moving the mitre saw.
How to adjust the mitre angle indicator for precise cuts.
Procedure for aligning the bevel angle stops.
Calibrating the pointer for 90-degree bevel cuts.
Steps to adjust for accurate 45-degree bevel cuts.
How to set and verify the maximum cutting depth.
Verifying the proper function of the blade guard.
Procedure for moving and securing the cutting head.
How to unlock the sliding mechanism for operation.
Explanation of the trigger switch and its lock-off feature.
Performing a simulated cut to understand blade path.
How to perform cuts at various mitre angles.
How to perform cuts at various bevel angles.
Performing cuts with combined mitre and bevel angles.
How to utilize the sliding carriage for different cuts.
Techniques for cutting wider workpieces using the slide feature.
How to preset the saw for shallow, repetitive cuts.
Steps for creating grooves or dados in wood.
Best practices for cutting uneven or warped wood.
How to use an auxiliary fence for repetitive cuts.
Techniques for cutting base mouldings accurately.
Instructions for accurate cutting of crown moulding.
Specific angle settings for inside and outside corners.
Procedures for cleaning sawdust accumulation.
Instructions for maintaining the lower blade guard.
Step-by-step guide for replacing worn carbon brushes.
Solutions for issues with the blade brake not stopping.
Troubleshooting steps for a motor that fails to start.
Corrective actions for imprecise angle cuts.
Resolving problems with guard movement or head assembly.
Causes and solutions for blade binding or wood burning.
Addressing issues where the blade hits the table.
Diagnosing excessive sparking from brushes.
Solutions for excessive vibration during saw operation.
Details of the product's three-year warranty coverage.
Specific exclusions and limitations to the warranty.
Information regarding consumer rights and provincial variations.
To Next Page