Need help?Do you have a question about the MasterCraft 054-8357-6 and is the answer not in the manual?
General| Model | 054-8357-6 |
|---|---|
| Category | Saw |
| Type | Circular Saw |
| Blade Diameter | 7-1/4 inches |
| Motor | 15 Amp |
| Cord Length | 6 feet |
| No Load Speed | 5500 RPM |
| Amperage | 15 Amp |
| Bevel Capacity | 0-45 degrees |
Precautions for safe use related to electricity, cords, and wet conditions.
Advice on operator alertness, protective equipment, and preventing accidental starts.
Specific safety instructions for circular saw operation, including guards and hand placement.
Understanding the causes of kickback and implementing preventive measures.
Ensuring the correct operation and use of the lower blade guard for safety.
Explanation of kickback causes and immediate actions to take.
Safety practices to minimize the risk of kickback during operation.
Step-by-step instructions for safely removing and installing saw blades.
To Next Page