Need help?Do you have a question about the MasterCraft 055-6751-6 and is the answer not in the manual?
General| Model | 055-6751-6 |
|---|---|
| Category | Saw |
| Type | Circular Saw |
| Power Source | Corded Electric |
| Voltage | 120 V |
| Blade Diameter | 7-1/4 inches |
| Max Cutting Depth at 90° | 2-7/16 inches |
| Max Cutting Depth at 45° | 1-3/4 in (4.4 cm) |
Instructions for safely removing and installing the saw blade, including key steps and notes.
Steps to attach and use the dust bag for dust collection during operation.
Guide to reading and adjusting the mitre scale for precise angle cuts.
Procedure to adjust the mitre angle indicator for accurate readings.
Steps to ensure the saw fence is perfectly perpendicular to the blade.
How to calibrate the bevel angle stops for accurate bevel cuts.
Setting and adjusting the maximum depth of cut for the saw blade.
Instructions on how to lock and unlock the saw's cutting head for safe operation.
How to unlock the slide carriage for wide board cutting and secure it for transport.
Guidance on securely bolting the saw to a stable workbench for safe operation.
How to install and use the work clamp for securing materials during cuts.
Explanation of the trigger switch functionality and safety locking feature.
How to align the laser guide with the cut line for increased cutting accuracy.
Step-by-step guide for setting up and executing mitre cuts accurately.
Instructions on how to set and perform bevel cuts using the saw's tilt mechanism.
How to use the sliding carriage for different types of cuts, including wide boards.
Procedure to preset and adjust the cutting depth for repetitive shallow cuts.
Instructions for making precise groove cuts using the saw's depth setting.
Technique for safely cutting warped material, ensuring correct workpiece placement.
How to install an auxiliary fence for improved safety and performance.
Guidance on cutting base mouldings, including setup and practice cuts.
Instructions and settings for accurately cutting crown moulding.
Tips for cleaning sawdust and maintaining the lower blade guard for proper function.
Procedure for inspecting and replacing worn carbon brushes for motor maintenance.
To Next Page