Need help?Do you have a question about the MasterCraft 055-6737-2 and is the answer not in the manual?
General| Brand | MasterCraft |
|---|---|
| Model | 055-6737-2 |
| Category | Saw |
| Language | English |
Specifications for the motor, including voltage, frequency, and no-load speed.
Sizes of the main table and extension wings for the saw.
Saw blade size and maximum cutting depths at 90° and 45°.
Details of the laser guide, including wavelength and power.
The overall weight of the table saw.
Essential safety measures for operating power tools to prevent shocks, injury, and fire.
Guidelines for maintaining a safe work environment and protecting the operator.
Specific safety rules for circular table saws, including workpiece handling and blade safety.
Concluding safety advice regarding blade access, workpiece removal, and environmental exposure.
Recommendations for selecting and using extension cords with the table saw, including gauge charts.
Diagram and labels identifying the main parts and features of the table saw.
Steps for safely unpacking the table saw and verifying all components are present.
Step-by-step instructions for assembling the table saw stand structure.
Instructions for mounting the table saw assembly onto the assembled stand.
Procedure for securing the saw to a workbench or alternative surface.
Advice on maintaining a clean work area around the table saw.
Instructions for using the blade raising/tilting handwheel.
Steps for installing and setting up the rip fence.
Detailed steps for mounting the saw blade onto the arbor.
Instructions for installing the blade guard and splitter assemblies.
Steps for attaching the left and right table extensions.
Guidance on installing the fence for extension tables based on workpiece size.
How to adjust the position of the table extensions and auxiliary fence.
Instructions for moving, locking, and aligning the rip fence.
How to calibrate the rip fence measurement indicator.
Steps for setting and adjusting the mitre gauge angle.
Fine-tuning the blade's positive stops for 90 and 45 degree angles.
Calibrating the pointer for the blade tilt angle scale.
How to raise, lower, and tilt the saw blade for different cuts.
How to operate the power switch and its safety features.
Understanding and using the overload reset button for motor protection.
How to use and adjust the table extensions for supporting workpieces.
Essential safety checks to perform before operating the table saw.
Detailed instructions for performing ripping cuts safely.
Techniques for bevel ripping and safely ripping small workpieces.
Instructions for performing crosscutting operations safely.
Performing crosscuts with beveled blades and 90° mitre angle.
Performing cuts with both beveled blade and mitre angle.
Performing mitre cuts with the blade at 0° bevel.
How to attach and use wood facing for the rip fence.
Instructions for making dado cuts, including safety precautions.
Routine cleaning of the saw base, table, and blades.
Checking and lubricating the blade raising/tilting mechanisms and general lubrication.
A guide to common saw issues, their causes, and corrective actions.
Details of the product's limited warranty coverage, duration, and exclusions.
Further warranty limitations and consumer rights information.
A comprehensive list of all parts with their corresponding numbers and quantities.
To Next Page