MasterCraft 055-6761-2 User Manual

4 5
model no. 055-6761-2 | contact us 1-800-689-9928
SPECIFICATIONS SAFETY GUIDELINES
SPECIFICATIONS GENERAL POWER TOOL SAFETY WARNINGS
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmosphere, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you
to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adaptor plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
reduce risk of electrical shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a RESIDUAL CURRENT
DEVICE (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the inuence of drugs, alcohol
or medication. A moment of inattention while operating power tools may result in serious personal
injury.
Motor 120 V AC, 60 Hz, 9.5A
Speed 5000 RPM (no load)
Blade 7 1/4” (18.4 cm) 24-tooth carbide-tipped
Arbour Size 5/8” (15.9 mm)
Cutting Capacity
2 x 8” (5.1 x 20.3 cm) crosscut at 0° mitre, 0° bevel
2 x 6” (5.1 x 15.2 cm) mitre cut at 45° mitre, 0° bevel
1 1/2 x 6” (3.8 x 15.2 cm) compound cut at 45° mitre, 45° bevel
1 1/2 x 8” (3.8 x 20.3 cm) cross cut at 45° bevel, left
Weight 19 lb 13 oz (9 kg)
WARNING!
Read all safety warnings, instructions, illustrations and specications provided with
this power tool. Failure to follow all instructions listed below may result in electric shock, fire
and/or serious injury.

MasterCraft 055-6761-2 Specifications

General

Brand	MasterCraft
Model	055-6761-2
Category	Saw
Language	English