Need help?Do you have a question about the MasterCraft MAXIMUM 54-8205-8 and is the answer not in the manual?
General| Model | 54-8205-8 |
|---|---|
| Category | Saw |
| Type | Circular Saw |
| Blade Size / Diameter | 7-1/4 inches |
| Amperage / Motor | 15 A |
| Bevel Capacity | 56 degrees |
| No Load Speed | 5500 RPM |
| Depth of Cut at 45 degrees | 1-3/4 in (4.4 cm) |
| Depth of Cut at 90 degrees | 2-7/16 in (6.2 cm) |
Safety precautions related to the tool's electrical components and connections.
Guidelines for operator safety, including alertness and proper attire.
Instructions for proper operation, maintenance, and accessory usage.
Safety rules particular to the tool's service and operation.
Safety guidelines for using the angle grinder attachment.
Safety precautions for operating with the flexible shaft attachment.
List of parts included with the Spin Saw.
Instructions for unpacking and verifying all product contents.
Steps for inserting and securely fastening cutting bits into the tool.
Information about the tool's built-in work lights for improved visibility.
Guidance on choosing the correct speed setting for different tasks.
Techniques for cutting oddly-shaped patterns without guides.
Using the tool for routing patterns with small router bits.
Method for cutting straight lines using a straight edge guide.
To Next Page