MasterCraft 54-8333-2 - Warning: Missing or Damaged Parts; Warning: Cleaning Solvents

9
WARNING: If any part is missing
or damaged, do not plug the tool into
the power source until the missing or
damaged part is replaced.
Carefully unpack the multi-cutter. Compare
against the “MULTI-CUTTER
COMPONENTS” chart at right.
NOTE: See product diagrams on Pages
9 & 10.
WARNING: To avoid fire or toxic
reaction, never use gasoline, naphtha,
acetone, lacquer thinner or similar
highly volatile solvents to clean the tool.
!
!
TOTE CONTENTS
TOTE CONTENTS
MULTI-CUTTER COMPONENTS
KEY
DESCRIPTION
QTY
A
Multi-cutter assembly
w/edge guide mount
1
B
Spirit/laser level
1
C
Pipe cutter attachment
1
D
Vacuum hose adaptor
1
E
Corundum blade -
#54-1077-4
5
F
Carbide tipped blades
● 24 teeth -
#54-1072-4
● 36 teeth -
#54-1074-0
1
1
G
Super cut blade –
#54-1071-6
1
H
Diamond wheel –
#54-1075-8
1
I
Tote
1
J
Blade holder
1
K
Edge guide
1
L
5 MM Hex key
1
M
Mitre gauge
1
Owner’s manual
1