8
INSTALLATION INSTRUCTIONS
TOOLS NEEDED
• Medium Philips screwdriver
• Tape measure or ruler
ACCESSORIES
Your Window Installation Kit ts hung or sliding windows 26.5-48” (67.5-123cm) and can be shortened for
smaller windows.
Part Description Quantity
Unit Adaptor 1 pc
Exhaust Hose
1 pc
Window Slider Adaptor 1 pc
Bolt 1 pc
Window Slider A 1 pc
Window Slider B 1 pc
Foam Seal A (Adhesive) 2 pc
Foam Seal B (Adhesive) 2 pc
Foam Seal C (Non-Adhesive) 1 pc
Security Bracket and 2 Screws 1 set
Drain Hose 1 pc
Drain Hose Adaptor(only for heat
pump mode)
1 pc
Power Cord Buckle 1 pc
Remote Controller and Battery 1 set
• Knife or scissors
• Saw (optional, to shorten window adaptor for narrow windows)
To Next Page
Loading...
Need help?
General
