MasterCraft NXT20 2017 User Manual

2017 OWNERS MANUAL / 288
Troubleshooting
Should the bimini ever bind or become locked in either the stowed
or deployed position, MasterCraft recommends that the bimini be
taken to an authorized MasterCraft dealer for repair.
TRANSOM/SWIM
PLATFORM CANVAS
Models
X10, X20, X23, X26, XT23, and XStar, as an option with the “Un-
der-tower Mooring Cover”
Purpose
Cover and protect the swim platform from the elements.
Location
Attached to the mooring cover and over the swim platform
Operation
Utilize the Velcro flaps connected on the swim platform cover and
the aft portion of the mooring cover to attach the two pieces togeth-
er. Open the flap on the mooring cover, insert the flap of from the
swim platform cover and sandwich the two together, pressing firmly
to ensure a tight attachment. Once all flaps are connected, pull the
platform cover over and around the aft section of the swim platform.
Pull the drawstring under the cover to tighten.
NOTE: The transom/swim platform canvas is purposely loose in
order for the operator to be able to step on the canvas for installa-
tion/removal.
The transom / swim platform canvas must be removed before
trailering, as it may damage gel coat.
ENGINE FLUSH
Models
Available as an option on all boats. There are two dierent types of
flushes and the installed option will depend on the boat model.
Purpose
Boats that will be operated in salt water (or brackish fresh water)
need to be rinsed after every use, including internal engine parts
where water has been drawn.
Location
The engine flush connection is on the transom, but varies on dier-
ent models.
Operation
The engine flush connection allows for quick and easy connection to
a shore-side garden hose or similar hose to quickly and easily flush
the engine. See the ILMOR Engine Owner’s Manual for additional
details regarding this important function. The flush connection is
located on the transom.
Troubleshooting
If a hose will not connect to the flush connection, locate a dierent
hose. Garden hoses work fine as long as the hose end is not bent or
misshapen.
If water will not enter through the flush connection, disconnect the
hose and check that there is no obstruction in the connection area.
If there is no obvious reason for the system malfunction, take the
boat to an authorized MasterCraft dealer for assistance.

MasterCraft NXT20 2017 Specifications

General

Wakeboard Tower	Yes
Stereo System	Yes
Draft	27 in
Seating Capacity	11 people
Length Overall	20 ft