To Next Page
J
John JonesJul 31, 2025
Why won't the trimmer head advance line on my MasterCraft SC20BST?
- RRaymond MitchellJul 31, 2025
If the trimmer head of your MasterCraft Trimmer won't advance the line, here's what you can do: * First, stop the trimmer, remove the battery, and clean the motor shaft and trimmer head, as they might be bound with grass. * Second, manually feed the line first. If the line still cannot feed out, rewind the line because the cutting line may not be wound well. * Third, if there is not enough line on the spool, replace the cutting line.
General
