MasterForce 241-0725 - Symbols

10
V
Volts
Three-phase alternating current
with neutral
A
Amperes
Read all safety warnings and
instructions
Hz
Hertz
Direct current
W
Watts
No load speed
kW
Kilowatts
Alternating or direct current
Microfarads
Class II construction
L
Litres
Splash-proof construction
kg
Kilograms
Watertight construction
H
Hours
Protective grounding at
grounding terminal, Class I
tools
N/cm
2
Newtons per square
centimetre
Revolutions or reciprocations
per minute
Pa
Pascals
Diameter
OPM
Oscillations per minute
Off position
Min
Minutes
Directional Arrow
S
Seconds
Warning symbol
or a.c.
Alternating current
Wear your safety glasses
Three-phase alternating
current
Wear hearing protection
SYMBOLS
WARNING: Some of the following symbols may appear on the drill. Study these
symbols and learn their meaning. Proper interpretation of these symbols will allow for
more efficient and safer operation of this tool.
!
SAVE THESE INSTRUCTIONS FOR REFERENCE
This symbol designates that this tool is
listed with Canadian requirements by
ETL Testing Laboratories, Inc.
Conforms to UL Std. 60745-1 and
60745-2-1.
57312-1