MasterForce 270-3282 - Page 13

Page 12
WARNING
Release the bail
switch before you adjust the chute
deector.
WARNING
Do not push the
trigger so far forward that a gap shows
between the deector and the chute.
1. Push and hold the trigger on the chute de-
ector.
2. Move the chute deector up to increase the
snow distance.
3. Move the chute deector down to decrease
the snow distance.
HEADLIGHTS
Turning the headlights on :
1. Push and hold the safety switch button.
2. Pull the bail lever in the direction of the
handle bar to turn the headlights on.
Turning the headlights off :
3. Release the bail lever.
ADJUST THE DISCHARGE CHUTE
FIG. 9
Discharge
chute
Chute
control rod
You can adjust the discharge chute 180° to
change the snow direction.
1. Turn the grip handle forward to move the
discharge chute to the left.
2. Turn the grip handle rearward to move the
discharge chute to the right.
ADJUST THE CHUTE DEFLECTOR
FIG. 10
Trigger
Chute
deflector
You can adjust the chute deflector up and
down to change the throwing distance of the
snow.
OPERATION
Bail
switch
LED lights
Safety
switch
button
FIG. 11